The Langolf Company, Inc.: Shave Tool Holder

The Langolf Company Incorporated is advancing the standards in shaving. This is a result of 30 years of design, engineering and development by Alan E. Langolf, CEO & President.

"THE LANGOLF COMPANY, INC. AUTO / SHAVE TOOL HOLDER"
DESIGNED FOR THE MOST IMPORTANT PART OF THE SCREW MACHINE...THE PERSON WHO USES IT!
Reducing Set-up Time By 75%

AVAILABLE FOR: NATIONAL ACME, NEW BRITAIN, WICKMAN, WARNER & SWASEY, CONE, GREENLEE MACHINES, INDEX, DAVENPORT, BROWN & SHARP, TORNOS-BECHLER, EUROTURN, PITTLER-TORNOS, SCHUTTE, AND OTHERS...

LCI-AUTO / SHAVE HOLDER - Assured repeatability for tighter tolerances, part after part.
THE LCI / HEAVY-DUTY HEAD - made of heat treated tool steel for rigidity.
ELIMINATE CHATTER - Heavy-duty gib & spring provides stabilizing pressure for tough jobs.
FLOAT SELECTION - Made easy--with one of it's three pre-set selections.
CUTTING EDGE - Finding center is also made easy with it's pre-set tool stop which assures accuracy every time.
ROLLER POSITIONING - This problem is now eliminated--you can move the ROLLER sideways from .001" to 1.500". This two axis roller (vertical & horizontal) and it's easy-to-reach screws provides you with infinite adjustments two ways. "This will make all job layouts easier".
REPLACEABLE - Replace the hard side of the dovetail without buying a new head.
TOOLING - To accept standard tooling...will not obsolete present tool inventory.
BASE - UNIVERSAL BASE - Allows quick-change for shaving in all normal positions with infinate adjustments two ways.
TAPER - Easy-to-reach adjustment, you can quickly remove any taper problem!!

PRIMARY HEAD DIMENSIONS
FOR THE
LANGOLF COMPANY, INC.
HEAVY DUTY AUTO/SHAVE
TOOL HOLDER

LCS
|
LANGOLF
COMPANY
SHAVE

1250
|
HEAD SIZE
1250 = 1 1/4"
2625 = 2 5/8"
ETC...

3
|
MOUNT

A3
|
MACHINE
A=ACME
W=WICKMAN
ETC...

HEAD SIZE	625DP	875DP	625	1000	1250	1625	2000	2250	2625	3500
MAXIMUM CAPACITY	5/8"	7/8"	5/8"	1"	1 1/4"	1 5/8"	2"	2 1/4"	2 5/8"	3 1/2"
MAXIMUM CAPACITY	-0-	-0-	-0-	1/4"	1/4"	1/4"	-0-	-0-	-0-	1 1/2"
DOVETAIL	1/2"	1/2"	5/8"	1"	1"	1"	1 1/4"	1 1/4"	1 1/2"	1 1/2"
A	3.36	3.50	3.87	4.92	5.56	5.75	6.20	6.52	7.22	8.03
B	.50	.50	.68	.87	.87	.87	.87	.87	1.00	1.00
C CONSTANT	.687	.812	.812	1.000	1.125	1.312	1.500	1.625	1.812	2.25
D	.22	.22	.22	.25	.25	.25	.25	.25	.40	.40
E ROLL DIAMETER	.75	.75	.75	1.12	1.25	1.25	1.25	1.25	1.25	1.25
F PIN	.312	.312	.312	.375	.375	.375	.375	.375	.500	.500
G TOOL LENGTH	1.12	1.12	1.25	1.50	1.75	1.75	1.75	1.75	1.88	1.88
H	1.87	1.87	2.00	2.50	2.87	2.87	2.87	2.87	3.50	3.50
I	1.44	1.44	1.50	1.94	2.06	2.06	2.06	2.06	2.38	2.38
J	.29	.29	.40	.73	.73	.73	.73	.73	.73	.73
K DOVETAIL SIZE	.714	.714	.912	1.288	1.288	1.288	1.554	1.554	1.787	1.787
L	1.29	1.29	1.65	2.88	2.88	2.88	2.88	2.88	3.17	3.18
M STD. REST (MIN)	-.02	-.02	.07	.07	.07	.07	.07	.07	0	0
N STD. TEST (MAX)	.80	.80	1.19	1.69	1.69	1.69	1.69	1.69	2.03	2.03
O ROLL WIDTH	.375	.375	.375	.687	.687	.687	.687	.687	.687	.687

OPTIONAL ROLL RESTS & DOVETAILS

P LH OFF-SET (MIN)	-.12	-.12	-.12	-.12	-.12	-.12	-.12	-.12	-.18	-.18
Q LH OFF-SET (MAX)	.69	.69	.69	1.50	1.50	1.50	1.50	1.50	1.84	1.84
R RH OFF-SET (MIN)	.75	.75	.75	.62	.62	.62	.62	.62	.62	.62
S RH OFF-SET (MAX)	1.56	1.56	1.56	2.25	2.25	2.25	2.25	2.25	2.65	2.65
1" W ROLL REST	YES	YES	YES	YES	YES	YES	YES	YES	YES	YES
1 1/2" W ROLL REST	NO	NO	NO	YES	YES	YES	YES	YES	YES	YES
2" W ROLL REST	NO	NO	NO	YES	YES	YES	YES	YES	YES	YES
5/8" DOVETAIL	YES	YES	STD	YES	YES	YES	YES	YES	NO	NO
1" DOVETAIL	NO	NO	NO	STD	STD	STD	YES	YES	YES	YES
1 1/4" DOVETAIL	NO	NO	NO	YES	YES	YES	STD	STD	YES	YES
1 1/2" DOVETAIL	NO	NO	NO	YES	YES	YES	YES	YES	STD	STD
J OPT JAW/CLAMP	NO	NO	NO	.45	.45	.45	.45	.45	NO	NO